How to clean Bearpaw boots with vinegar?

Do you love to wear Bearpaw boots? Bearpaw is a renowned brand of footwear which is founded by Tom Romeo. It was in the year 2001. The interesting thing is that Bearpaw boots are made from sheepskin. Sometimes it is used for casual footwear for both men and women.

In this article, we will discuss the cleaning process. Do you know how to clean Bearpaw boots with vinegar? We will teach you step-by-step in this article. Initially, we need 1 Tablespoon of white vinegar, one cup of water, 1 boot brush, 1 soft-bristled brush, soap, towel, etc. We will use all of them and complete the cleaning process within a short time. Let’s go for a detailed discussion.

how to clean bearpaw boots with vinegar

Step-by-step guide for cleaning Bearpaw boots with vinegar

Step 1: Collecting all the ingredients

Firstly, we need to select the Bearpaw boots that we want to clean and will make them glow after the cleaning process. Now, you need to collect some warm water and keep it in a pot. This time we also need a small bowl of vinegar, a towel, and soap.

Step 2: Dissolve it in the hot water

Already we have collected the most important thing that is necessary for cleaning our favorite Bearpaw boots. Keep them according to the order and now our task is to soak the Bearpaw boot in the hot water for over 20 minutes. During this time, all the bacteria and dirt will be dissolved into the water.

brush bearpaw boots

Step 3: Using vinegar on the boot

During this time, we will notice a bad smell. Our next task is to rinse the boot with vinegar. Do not use too much hot water, it will damage the quality of the boot.

During this time, you can use a towel and a spray machine. Now add the vinegar into a bottle and set up the spray machine at the top. Pick up a towel and spray vinegar on the towel. Take it to an adequate amount so that we can easily clean up the Bearpaw boot.

Now gently and slowly we need to rinse the boot from top to bottom. If you have noticed that there is a dark spot then rinse it hard. It will help you to get rid of the spot. If you are washing a shoe of white and black color then these chances are very high. Evenly you need to rinse the entire boot and complete this process.

rinse bearpaw boots

Step 4: Repeating the previous step

If the job is not done yet you need to continue step 3 again and again. As long as you are satisfied enough, do it properly. Though it is a monotonous process, you need to do it successfully.

Step 5: Rinsing the boot properly

If you confirm that all the dirt has gone away then we will continue the next step. This time our target is to make it dry. To do that we will take the help of a fresh towel.

You can simply choose a fresh white towel and that could be a smart choice. Rinse the Bearpaw boots with the white towel and a few minutes later, we will notice the change it will start drying.

The drying process may take some time. It could be up to 2-3 hours depending on the sunlight and heat. If you are cleaning it in the summer season, easily you can use the summer light.

Step 6: Using the brush to make it glowing

Do you think it is completely dry now? If you are confirmed of that then use a normal brush to remove the remaining dirt. Yeah, after cleaning there are some dirt and it is annoying. You have to clean it carefully by using a soft brush.

Step 7: Dry it

Now our task is almost complete and we will store it in a dry place.

How do you clean your bearpaw boots inside part?

Our cleaning process is complete for the outside part of the boot. Now let’s have a look at the inside part of it. This time we can mix the water with a disinfectant solution for removing the virus or bacteria inside the shoe. Use a small towel and evenly clean the entire area of the inside part of the boot.

To be more confident, we can use an antifungal spray on the inside part of the boot. Now we will follow the same procedure. Use a dry towel and rinse the inside part of the shoe. We need to use proper sunlight or heat to dry them up. Wait at least 2-3 hours for drying.
After that, your Bearpaw boot is ready to use.


How often should we clean up the Bearpaw boots?

Well, there is no specific timeframe to do that. If you think that your Bearpaw boots are dirty and you have some free time do it now. Naturally, we suggest you do it once a month and that would be fine.

How long does it take the cleaning procedure?

It might take about 30-45 minutes.

Are Bearpaw boots water resistant?

Yes, some boots are water resistant and the price range is pretty high. However, not all the Bearpaw boots are water resistant.

How do you protect your Bearpaw boots?

If you like to extend the life of your Bearpaw products, you can use several types of sheepskin and suede products. They will be a long-lasting product and comfortable. In the winter season, you can use a damp microfiber cloth and some special spray cleaner to keep your boots perfect for using them every day.

End Note

This is one of the easiest ways to clean up Bearpaw boots. Just follow our tips and do it at home. If you like to know anything more about this cleaning procedure do not hesitate to leave a comment below. We like to hear from you. Thanks a lot for being with us.

Comments are closed, but trackbacks and pingbacks are open.